Addressable acoustic sounders SAL-4001 are designed for acoustic signalization of fire with tones. They are dedicated for operation in addressable detection lines of POLON 6000 and POLON 4000 system only. They are activated by the control panel when all programmed criterion are fulfilled e.g. fire alarm in particular zone, general fire alarm etc.
All electronic units with piezoelectric buzzer are placed inside 40 model range detector casing. Some room inside the SAL-4001 device is left for installation of a 9 V 6F22 battery. The G-40S (fire resistant) base should be used for mounting the signalling device on a ceiling.
The base is equipped with non-screw junction block for wire connection. The junction block has six terminals, two pairs marked „+” and „-“ as an input and output of detector loop and two terminals for connection of external 24 V power supply.
tone, acustic, low current
16VDC - 32.0VDC
|Supply voltage from detection line|
16.5VDC - 24.6VDC
|Supply voltage of external power supply unit|
16VDC - 32VDC
|Current consumption from battery|
≤ 10mA in alarm mode
|Current consumption from external power supply|
≤ 16µA in alarm mode in alarm mode
with supply from external PSU 100dB
|Operating temperature range|
from -10°C to 55°C
|Housing ingress protection|
Ф 115x54 mm
acc. to PN-EN 54-3